To understand the severity of occupational lung disease it is important to first understand how the lungs are affected by chemicals.
Inhalation is a major route of entry into the body. Breathing in contaminated air is the most common way that workplace chemicals enter the body. When you inhale contaminated air, it travels through the respiratory system into the lungs where it is distributed throughout the body by the bloodstream. The average person takes 12 breaths a minute or intakes 6L of air a minute, including any contaminants.
The respiratory system does a good job of filtering the air as it enters the nose and travels further into the respiratory system. On its journey to the lungs, the passageways get smaller and thinner like branches of a tree. Eventually, it hits the walls of the lungs where oxygen is transferred into the bloodstream and distributed throughout the body. Much smaller particles not visible lodge themselves into the walls of the lungs causing irritation which can cause an acute or immediate reaction like an allergic reaction. Other particles can cause permanent damage or scarring and eventually interfere with the lung's ability to pass oxygen into the bloodstream.
Occupational related lung disease covers a wide array of diagnoses that may be caused by the inhalation of dusts, chemicals, or proteins, this can include:
• Occupational asthma
• Chronic obstructive pulmonary disease (COPD)
• Bronchiolitis Obliterans
• Hypersensitivity Pneumonitis or Farmers Lung, lung fibrosis
• Inhalation injury
• Infections
• Pneumoconiosis
• Lung cancer
• Mesothelioma
Occupational lung diseases are one of the most frequent and serious of all occupation-related diseases.
Symptoms of occupational-related lung disease can vary depending on the specific type of lung disease, but common symptoms include shortness of breath, coughing, wheezing, chest tightness, and fatigue.
Most occupational lung diseases are caused by repeated, long-term exposure, but even a severe, single exposure to a hazardous substance can damage the lungs. Occupational lung disease can appear years later even after exposure stops.
People involved in physical labour tend to exert themselves at a greater rate, breathe harder and take in more air over an 8-hour period than someone who is more sedentary. So, they have greater exposure.
You should be concerned about contaminated air if you have work processes or activities that produce Gases and Vapours (including evaporation); Mists, cutting and grinding, paint spray; Dusts, fumes and smoke.
Inhalation contaminants can be categorized into three categories: dust, chemicals, and proteins.
Dust
Dust contaminants can include substances such as Fungus, Mold, Diesel Exhaust, Asbestos, and Silica.
Chemicals
Chemical inhalation contaminants can include substances such as Carbon Tetrachloride; 1,1 Dichloroethane; Carbon Monoxide; Soot; Arsenic Compounds; and Nickle Compounds.
Proteins
Protein inhalation contaminants can include Latex rubber due to allergies.
Particulate matter in the air can cause occupational related lung disease and includes a combination of dust, pollens, molds, dirt, soil, ashes, and soot. It originates from many sources, such as factories, smokestacks, exhaust, fires, mining, construction, and agriculture. The finer the particles are, the more damage they can do to the lungs, because they are easily inhaled deep into the lungs, where they then are absorbed into the body.
Reading the Safety Data Sheet for the chemicals you work with and understanding the hazards you are working with is an important step in the prevention of occupational related lung disease. Other methods to prevent occupational lung disease include providing proper ventilation, using personal protective equipment (PPE), and minimizing exposure to harmful substances. If a respirator has been recommended for any task at work, it is important to use it. Occupational lung diseases are preventable with controls like respirators.